|
|
NQG-5 RAIL CUTTING MACHING
|
| This internal-combustion engine rail machine
is a kind of light high-efficient rail cutting machine. It
regards four stroke petrol machine of Honda as motive force,
it is brisk to start, operates steadily, The low consumption
is durable, the noise is low, it is small to shake. Its structure
is exquisite, it is swift to load and unload, the card rail
is firm , Small, light, easy to operate, Notch of high quality,
utilization ratio high emery wheel have, but rail competent
with competent to move land have. To cut the homework suitable
43-75kg/m various rail.
January 2007 by the Ministry of Railways CRCC certification. |
|
|
|
Design the characteristic
Machine this cut head rotate around two axle, emery wheel
to to cut slice direction can make at random changing rail,
Prevent emery wheel slices of orientation from cut apt defect
that frit, emery wheel always along cut slice obstruction
minimum direction enter and give, Can achieve high quality
high-efficient purpose to cut rail. Machine this can carry
by rail and rail 3 directions in outside cut the rail, raise
one scene of utilization ratios of emery wheel. Lie in this
machine unique place : Install as person who cuts rail card
get rail, if emery wheel one does not aim at and cut the face,
Adjust and finely tune the device , can make the emery wheel
one aimed at and cut the surface , needn't install the card
for the second time , Very convenient and swift.
|
|
|
 |
|
MAIN SPECIFICATIONS
Power: HONDA gasoline engine, 4.8kW at 3600r/min Grinding stone
type:PB400×3.5×32,Rotate speed is 70m/s.
Rotate speed: 3000r/min
Cutting time: 100s to cut 60kg/m rail
Quality of section: The perpendicular degree is not more than ±0.5mm,the surface is bright and neat and has no burn.
Weight: 45kg
Dimensions: 730×400×450mm |
|
|
|
